Steps To Repair The 0x0000056 Error On Windows

The 0×00000056 error is also known as the Windows Stop Error and is known as a serious kind of complication in the computer system. Basically, this error is from issues in drivers of the PC. Just before restarting Windows, the error shows up on a blue screen; Windows restarts again and again because it cannot deal with the error anymore. Though it may be intimidating, the way to deal with this is not so difficult once you know how.

So why does this kind of error happen? Usually, inconsistencies in the drivers of Windows cause the error. If they are not updated, incompatible or perhaps damaged, then it will trigger the error in the system. When this happens, you will not be able to use programs you want to run because the Windows system cannot read it. Be mindful that this error is serious enough to prevent the computer from working; it can shut down the system. To avoid this, you have to follow certain measures in fixing the damaged drivers and treating the other damages that come with it as well.

You can do the repairs by yourself. First, check any new hardware you have installed recently. Was it installed properly? Is it compatible? Is it working as it should? If you notice inconsistencies, most likely the new hardware is causing the error. To fix this problem, remove the new hardware and see if the error disappears. Next thing to do is to update the drivers. Check the third party drivers and update them first. After that, go to Device Manager and update the programs one by one. To go there, find My Computer and select Properties. You will find the Device Manager there where you can update the drivers. This will enable Windows to interact with the hardware components smoothly. Not only are the drivers the ones that need updating but also Windows. To do this, go to Control Panel and select Security. Then, check for updates and install whatever is needed for Windows.

Finally, clean the registry with a reliable registry cleaner tool. This database stores all important details such as passwords, settings and options that affect the performance of your computer. If there are recalled errors there, then the error is most likely to occur. To fix this issue, you will need to clean the registry to take out corrupt or damaged files. Make sure you use a registry cleaner that comes highly recommended. It can solve the errors along with other system failures easily without you having to do anything manually. All you have to do is download the program, install properly and let it run. It will automatically identify the errors, infections and other Windows problems. Then, it will repair them without you having to do any fixing. It is a faster, efficient and easier way to deal with the 0×00000056 error without any fuss.

How to Recover Windows 2000 Files When the SYSTEM Hive Is Corrupt or Damaged

A hard drive in a computer system is the most basic device for data storage. With the advancements in technology and with the amount of time and work we dedicate on our systems, the storage capacity of the hard drive has increased immensely. Along with that, the hard drive has become more compact making it convenient to carry around. Having said that, at times you are unable to start your computer because of hard drive corruption. Such corruption issues may occur due to various reasons such as corrupt system registry, virus infections, power outages, faulty hardware components, etc. In such cases, there are numerous corrective measures that you can try to recover files. If nothing works out, then you should use a third-party Partition recovery software to recover all the Windows data.

Let us consider a situation in which you are unable to start your Windows 2000 system. The following error message is displayed in this regard:

“Windows 2000 could not start because the following file is missing or corrupt:



The most prominent cause of this startup issue is that the SYSTEM hive of the computer is corrupt or damaged.


To overcome this Windows 2000 startup issue, you would need to restore the SYSTEM registry hive using the Windows 2000 CD. To do this, the following steps are required:

Insert the Windows 2000 CD ROM in the CD-ROM drive and restart the system.

When the ‘Welcome to Startup’ screen is displayed, press R to repair the Windows installation.

Press C to repair the Windows installation using the Recovery Console.

Rename the system file in the ‘%SystemRoot%System32Config’ folder by using the following commands. Press Enter after typing every command:

cd system32

cd config

ren system system.old

Copy the ‘ %SystemRoot%RepairSystem’ file to the ‘%SystemRoot%System32Config’ folder by using following commands. Press Enter after typing every command:



cd repair

copy system %systemroot%system32config

Restart the computer.

Your computer should start perfectly after performing these steps. However, if it is not so then you should take the services of a third-party Partition recovery software. With the help of these read-only data recovery tools, you can recover files without causing any damage to the existing files or storage media.

Stellar Phoenix Windows Data Recovery is the most efficient Partition recovery software that recovers lost, deleted, or formatted data from various storage devices including iPods, pen drives, memory cards, etc. Supporting NTFS, FAT, and exFAT file systems and recovering deleted emails from MS Outlook and Outlook Express, this Partition recovery software is compatible with Windows 7, Vista, Server 2003, XP, 2000, and NT4(SP6).

Bad Pool Caller Error – How to Fix the Bad Pool Caller Blue Screen Error on Windows

The “BAD POOL CALLER” error is actually one of the most damaging errors known to Windows users – as it’s renowned for restarting your PC and showing a fatal “blue screen of death”. Many people receive this error but don’t even know what causes it. This means that if you want to repair this problem, you first need to know why it shows and then how to fix the various parts of your computer that often cause it. Here’s what you need to do…

This Bad Pool Caller error is actually shown because of your PC’s “data pool”. The data pool is a small collection of files & settings which Windows computers use to help them call various settings instantly on your system. It’s like having a small pool of information that your computer can “dip into” in order to quickly gain settings / information about your PC. Not many people even know the data pool exists, but the fact is that it’s continually causing errors which often include the “BAD POOL CALLER”. This particular error is caused when your system tries to “call” / “load” a certain setting from the data pool, but finds it cannot. This sends your computer into a blue-screen crash, making it unable to proceed.

There are various reasons why this error will show, and to be honest, no-one really has a set checklist of exactly what causes it. The best thing to do is to first check the “hardware” of your PC is functioning correctly, then that your programs are working well, and that Windows is running as smoothly as possible.

The initial step you must take to repair this problem is to ensure the hardware of your PC is working well. To do this, you should do this by checking all the cables and connections that your various hardware components require, are all secure and working. This can be done by just looking at the various parts of your computer and taking a mental note to see if everything’s okay.

After that, you should then look to reinstall any program which could trigger this error. It’s often the case that resource-intensive programs, such as “Photoshop”, will often call so many data-pool components that it will trigger this error. To ensure this is not a problem, you should reinstall any programs which trigger the issue.

Finally, and this is probably the most effective way to fix the Bad Pool Caller error, you should look to repair any issues that are inside the “registry” database of your PC. The registry database is a central storage facility which keeps all the files, settings & options that Windows requires to run each day. Unfortunately, this database is used so much by your system that it’s continually being damaged, leading your computer to become unable to read the files it needs to run. To ensure this is not causing the bad pool caller problem, you should look to clean out the registry by using a “registry cleaner” application.